Industry news 網(wǎng)站首頁 / Industry news
The cross-cutting machine can be used for the cutting of paper materials such as coated paper, coated paper, kraft paper and paper-plastic composite, plastic sheet, etc., especially suitable for the production of paper industry and paper processing industry. Then, when using the cross-cutting machine, it is necessary to carry out regular maintenance, so as to ensure the smooth running of the machine and the cutting quality of the product.
First of all, the cross-cutting machine should be installed in a place that is dry, ventilated, well-lit and easy to operate. Secondly, after each operation, it is necessary to clean the dust and paper scraps on the machine in time, check the cutter and the grinding wheel, check whether there is any abnormality in the running part, and reasonably add the lubricating oil. Side by side net oil moisture high and water storage tank. Finally, it is necessary to cut off the power of the cross-cutting machine according to the operation requirements of the manual and maintain the computer operating system.
The above is the basic daily maintenance work of the cross-cutting machine. The general principle is that the inspection, cleaning, and lubrication maintenance work is fully in place to ensure that the various components of the equipment are in good condition. In addition, it is also important to improve the technical quality and level of the operators. It is necessary to be responsible for the operation of the control part. No one is allowed to operate without permission.